top of page
14.1" 6.5 Creedmoor Battle Rifle Pro Complete Upper - Hanson .875" Barrel

14.1" Heavy Barrel 6.5 Creedmor, yeah. 


*Any Muzzle Device Available Upon Request At Dealer Cost (No Markup)


The Basics


14.1" Hanson 416R SS Barrel , Aim sports 13.5" Mlock Handguard, Phosphate Chrome .308/6.5c BCG, DPMS Low Upper, & Breek Warhammer Charging handle


Factory Pinned Gas Block, Lapped Upper Receiver, Bedded Barrel, Every component is hand fitted and tested prior to assembly, test firing, and ultimately shipping. 


The Specifics



Manufacturer - Ballistic Advantage

Length/Chamber - 14.1" 6.5 Creedmoor

Twist - 1:8 

Material - 416R SS

Profile - Hanson .875

Gas System - Carbine

Thread Pitch - 5/8x24

Gas Port - .056~

*Pinned Gas Block*

1st Rebarrel - FREE


Barrel nut is sequentially torqued down to 50 FT-lbs. Starting at 25, then 35, and then finally 50 FT-lbs to ensure proper mating of the threads. 


Barrel is also bedded to the upper receiver with an expanding/hardening compound to ensure perfect fit and reliable accuracy. 


If you legit burn out a barrel, like 10,000 -25,000 rounds, and the barrel becomes inaccurate I will rebarrel it for you for free. Good luck.


Bolt Carrier Group:

Bolt Material - 9310 Alloy

Carrier Material - 8620 Alloy

Gas Key Material - 4130 Alloy

Profile - DPMS

Finish - Phosphate Chrome

Gas Key Screws - Grade 8

Forward Assist Cuts

Mil-Spec Firing Pin (Hard Chrome Coated)

Viton O-Ring Enhanced Extraction



Manufacturer - Aim Sports

Lengths - 13.5"

Material - 6061 T6 Aluminum

Finish - Hard Coat Black Anodization

Mounting Platform - Mlock

Barrel Nut - Steel


Barrel nut torqued to 50 FT-lbs

Crossbolts torqued to 30 IN-lbs with blue Loctite


We apply a Permatex Anti-Seize solution to the receiver extension before installing the barrel nut to ensure they do not lock up over many years of hard use. 


Upper Receiver:

Style- DPMS Low

Material - 6061 T6 Aluminum

Machined from Forged Aluminum

Finish - Type 3 Hardcoat Anodized Black

Standard Dust Cover

M4 Feed Ramps

T-Marked, if you care...


Uppers are lapped to ensure the truest connection between the upper and barrel for maximum possible accuracy.


Charging Handle:

Manufacturer - Breek

Type - Ambi

Material - 7075 T6 Aluminum

Finish - Type 3 Hardcoat Anodized


Gas Block:

Manufacturer - Ballistic Advantage

Material - 4140 Steel

Style - Low Profile

Size - .875"

Attachment Method - 2x Set Screws + Steel Roll Pin


Set screws are torqued to 30 IN-lbs and have High-Temp Permatex 272 threadlocker applied for extra security.


*Please contact me before attempting removal of the Gas Block. These are not meant to be tampered with. 


Gas Tube:

Length - Carbine

Material - Stainless Steel


*** Any flash hider/ muzzle brake on the market can be substituted at dealer cost on your upper ***


Flash Hider:

Type - 4-Prong

Manufacturer - KAK

Thread Pitch - 5/8x24

Caliber - .30/7.62mm 

14.1" 6.5 Creedmoor Battle Rifle Pro Complete Upper - Hanson .875" Barrel

SKU: 6.5-Shorty
Lead Time is 2-3 Weeks
  • These are assembled by me by hand as well as transported back and forth from the range from test firing. Becuase of the handling of the uppers there will be some very minor cosmetic blemishes. If you are looking for a showroom finish, please look elsewhere. I expect my uppers to be used harshly and to handle the abuse. Any issues with function will be immediately addressed and remedied to the satasfaction of the customer. 

bottom of page